HT instruments THT60 - Manual (Page 16)

THT47 - THT60
EN - 14
Language setting
1. Touch the box “Language”. The following screen appears on the instrument's display:
Fig. 11: System language setting
2. Scroll the list of the available languages and touch the desired one. A tick “
” is
inserted into the corresponding line.
3. Touch “OK” to save your choice and exit the screen or “Cancel” to exit without saving.
Setting the Video output
Touch the box “Video output”. The following options are available to define the type of
video system to which to connect the instrument on the terminal with the same name (see
Fig. 4 – Part 15): PAL, NTSC, Off (disabled output)
Setting the Accuracy
Touch the box “Accuracy” to define the instrument's accuracy when measuring
temperature. Following options are available: Single (the value is displayed with one
decimal figure). Double (the value is displayed with two decimal figures).
Setting the temperature measuring unit
Touch the box “Temp. Unit” to define the measuring unit used by the instrument when
measuring temperature. Available options are: °C, °F (°F = 32 + 1.8x°C), °K (°K = °C +
273.15)
Setting the distance measuring unit
Touch the box “Distance Unit” to define the measuring unit used by the instrument when
measuring the distance from the object. Available options are: M (metres), FT (feet) (FT =
0.3048xM)
5.2.1.2 “Control” section
In this section (see Fig. 12) it is possible to define the activation of the built-in illuminator,
set display brightness, the automatic calibration time, the display's switch-off time and the
instrument's auto power-off time.
Fig. 12: “Control” section, Setting menu