HT instruments THT60 - Manual (Page 48)

THT47 - THT60
EN - 46
5.4 TRANSFERRING IR IMAGES/VIDEOS ONTO THE PC
The instrument allows saving the IR images/videos on an external micro SD card and to
transfer them onto the PC by using the USB cable. Both the micro SD card and the cable
are provided with the instrument. Proceed as follows:
1. Insert the micro SD card into the instrument on one side (see Fig. 4 – Part 19).
2. Connect the USB cable to the instrument (see Fig. 4 – Part 16) and to the PC or use
the adapter for micro SD/SD card provided in case you have an SD card reader
installed on the PC.
4. Inside “My Computer”, search for the removable disk associated to the micro SD card
and copy the files “YYMMDD_xxxxT.JPG” of the desired IR images or the files
“YYMMDD_xxxxV.MP4” of the desired IR videos contained in two separate folders on
the micro SD card to a PC folder.
5.5 VIDEO OUTPUT
The video output available in the instrument (see Fig. 4 – Part 15) enables displaying the
IR image acquired on an external monitor or video recording device capable of managing
PAL or NTSC systems. To connect the instrument, proceed as follows:
1. Switch on the instrument
2. Touch the icon “ ” and setting the PAL or NTSC system (see § 5.2.1.1)
3. Connect the instrument to the external monitor or recording device using the video
cable provided.
4. Turn on the external monitor or device
5. Verify to see the IR image both on the display instrument and on the external monitor
or device with simultaneous manage of the operation
6. Touch the icon “ ” and set the type of system PAL or NTSC (see § 5.2.1.1).
7. Perform the saving/monitoring of the image on the external monitor or device
8. At the end of the operations select the option “Off” on the instrument (see § 5.2.1.1),
switch off the monitor or the external device and disconnect the video cable from the
instrument.