4 probe deployment, Probe deployment – In-Situ RDO PRO-X Process Optical Dissolved Oxygen Sensor Manual User Manual
Page 11
Advertising
800-446-7488
11
www.in-situ.com
Probe Deployment
The cable end of the RDO PRO-X Probe is internally threaded (1¼ – 11½ NPT) and
can be attached to a male threaded pipe. When deployed, make sure that the nose
cone and thermistor are completely submerged.
1
10 m cable attached
2
Twist-lock connector
3
1 1/4 NPT threading
Advertising
This manual is related to the following products: