In-Situ smarTROLL Multiparameter Handheld Operators Manual User Manual
Operator's manual, Troll, Mp handheld instrument
Advertising
Operator's Manual
SMAR
TROLL
™
MP Handheld Instrument
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
©
2013. All rights reserved.
0099172 | Rev. 003 | 11/2013
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1 Introduction
- 2 Safety
- 3 General Specifications
- 4 Sensor Specifications
- Level, Depth, Pressure Sensor Specifications
- Barometric Pressure Sensor Specifications (Battery Pack)
- Conductivity Sensor Specifications
- Dissolved Oxygen RDO Fast Cap (Optical Sensor) Specifications
- ORP Sensor Specifications
- pH Sensor Specifications
- Air Temperature Sensor Specifications (Battery Pack)
- Sample Temperature Sensor Specifications (Probe)
- 5 Battery Pack Specifications
- 6 Instrument Overview
- 7 System Components
- 8 Probe Setup
- 9 iSitu Overview
- 10 iSitu Sites
- 11 iSitu Data
- 12 iSitu Sensor Calibration
- 13 Low-Flow Pump Testing
- Low-Flow Sampling with SMARTROLL™ MP Instrument
- Purchase the Low-Flow App
- Create a Low-Flow Template from the Desktop
- Email Low-Flow Template to an iPod or iPhone
- Load the Template into the iSitu App
- Set up a Low Flow Test From a Template
- Set up a Low-Flow Test without a Template
- Install the Pump
- Prepare the Flow Cell
- Start a Low-Flow Test
- Transfer Low-Flow Report to a Computer
- 14 Care and Maintenance
- 15 Declaration of Conformity