8 probe setup, Install the batteries, Chapter 5—probe setup – In-Situ smarTROLL Multiparameter Handheld Operators Manual User Manual
Page 16: Probe setup
Advertising

16
Probe Setup
The probe is shipped with a storage plug and protective dust caps in place.
1
Dust cap protector on the RDO Sensor. (Install the RDO Cap before
deploying the instrument.)
2
pH/ORP storage plug. (Remove the storage plug and install the
pH/ORP sensor before deploying the instrument.)
Install the Batteries
The 4 AA batteries that are shipped with the battery pack are likely to last for 80 hours
of continuous use.
1
Power indicator
2
On/Off button
3
Belt clip
4
Battery compartment latch
5
Cable connection
Advertising
This manual is related to the following products: