In-Situ Con TROLL PRO Operators Manual (purchased before 10 May 2012) - Manual (Page 34)

34 Logged Data
3. Select Customize serial settings and tap the forward arrow. A warning will
appear. Tap the Yes button.
4. A series of screens will appear. Move through them by tapping the forward
arrow button.
• Make sure that the Port Number matches the port number assigned by the
Bluetooth Utility in the previous section.
• Make sure that ASCII, not RTU, is selected. Tap the Check Mark button.
5. You will return to the “Home” screen. Tap the yellow Connect button.The
temperature and barometric pressure from the Con TROLL PRO will appear.