In-Situ RS485 to SDI-12 Adapter for the TROLL 9500 - Manual (Page 2)

1 800 4insitU
(toll-free, US and Canada) or 970 498 1500
www.in-situ.com
Information is subject to change without notice. In-Situ and the In-Situ logo, Win-Situ, Pocket-Situ, TROLL, TROLL Com, Rugged Cable, Rugged
Reader, and RDO are trademarks or registered trademarks of In-Situ Inc. Microsoft, Windows, Excel, and ActiveSync are trademarks or
registered trademarks of Microsoft Corp. Copyright © 2005-2009 by In-Situ Inc. All rights reserved.
Multi-Parameter Water Quality TROLL ®
Mp troll 9500 sDi-12 ADApter
Catalog No. 95200, 95210
0095202 rev. 001 06/09
gUiDelines & precAUtions
• Calibrate the water-quality sensors using Win-Situ or Pocket-Situ; SDI-12
protocols do not support calibration
• The Adapter is weather-resistant but not completely waterproof. A protective
enclosure is recommended
• Determine voltage available at the Adapter before using with Rugged Cable
longer than 170 ft (52 m). Refer to the table on the front of this sheet
• Not for use with a miniTROLL, MP TROLL 9000, or Level TROLL
SDI-12 Data
Recorder
(customer-supplied)
MP
TROLL
9500
Rugged Cable
(RS485)
sDi-12 ADApter
Catalog No. 95200, 95210
to another SDI-12 device
up to 200 ft (61 m)
Up to 4000 ft (91 m)
SDI-12
Up to 200 ft (61 m)