In-Situ smarTROLL RDO Handheld Maintenance Kit - Manual

Instruction Sheet
SMAR
TROLL™ RDO Maintenance Kit
Part Number 0099510
Kit Contents
l
Calibration chamber and sponge wafers (for RDO Sensor calibration)
l
Lens cloth (for RDO Sensor lens)
l
Silicone lubricant (for O-rings)
l
Replacement O-rings
O-ring Installation Locations
Apply a very thin layer of silicone-based lubricant on the O-rings prior to installation.
1 Cable end
2 Front end
3 RDO Fast Sensor Cap O-ring locations
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
© 2013. All rights reserved.
0099512 | Rev. 002 | 11/2013