Apple Mac 5260/100 User Manual
Page 63
Advertising

Troubleshooting
Symptom Charts/Hard Drive - 18
Flashing ? appears at
startup in 5260/
100 with 1.6 GB ATA
hard drive (p/n
661-1107), and may
be corrected with
restart.
1 Be sure system software is not corrupted. See the Software
Troubleshooting document in the HW-SW Procedures topic
under the Troubleshooting tab on the Service Source CD
startup screen.
2 Remove the 1.6 GB ATA hard drive and look at the serial
number on the bar code label.
3 If serial number is within range XXX
6099
XXXXX to
XXX
6131
XXXXX, replace hard drive.
Advertising
This manual is related to the following products: