KANOMAX 1560 Multi-Channel Anemomaster Software Manual - Manual (Page 10)

9
4.3 Displays
This program adopted Multi-document interface ( MDI ). This program opens basic data file ( *.KMA ) and
indicate set up data and measurement data which are stored in files.
More than two basic data files can not be opened simultaneously.
Structure of display is as follows. (Figures in parentheses shows numbers of windows which can be
indicated simultaneously.)
Index screen [Pic. 4]
Windows
Module set up window (1) [Pic. 6, 17]
Probe set up window (1) [Pic. 7, 18]
Module set up indication window (1)
Probe set up indication window (1)
RS232C parameter indication window (1)
Measurement parameter indication window (1)
Time series graph indication window (1～320) [Pic. 23]
Data table indication window (1) [Pic. 25]
Dialogue box
RS232C set up dialogue box [Pic. 9, 19]
Measurement parameter set up dialogue box [Pic. 10, 20]
Time series graph indication parameter set up dialogue box [Pic. 21]
Time series graph : select probe to indicate dialogue box [ Pic. 22 ]
Data table indication parameter set up dialogue box [Pic. 24]
Version information dialogue box [Pic. 27]
File information dialogue box [Pic. 29]
Message dialogue box [Pic. 30, 31]