Installing the data rom – KANOMAX 6332D Airflow Transducer User Manual
Page 14
Advertising
7
Installing the Data ROM
<Caution>
- Make sure to cut the power supply to the main unit before installing the Data ROM.
- Install the correct Data ROM that corresponds to the probe number.
- Position the Data ROM in the correct orientation.
- After confirming that the Data ROM is properly set, use the flat-blade screwdriver to rotate the
cam 90 degrees clockwise to lock it in.
Match the notches
Data ROM
Enlarged view of cam
Advertising
This manual is related to the following products: