KANOMAX S388-70 Handheld Particle Counter Data Retrieval Software Manual - Manual (Page 5)

5
2) Confirm the Handheld LPC Communication Address
Confirm the Handheld LPC communication address by the following procedures.
Display Screen
Key
Operation
Description
POWER Turn on the power by pressing the POWER key.
ENTER
Proceed to the <MENU> screen by pressing the
ENTER key.
▲▼
ENTER
Select “3. OPTIONS”.
Proceed to the <OPTIONS> screen by pressing the
ENTER key.
▲▼
ENTER
Select “3. UTILITY”.
▲▼
ENTER
Confirm that the “3. ID” is set to “00”.
If it is set to any other value, change the value to “00”
by using the ▲▼ key.
Confirm that the “4. Communication” is set to
“RS232C”.
If “RS485” is selected, change it to “RS232C” by
using the ▲▼ key.
Press the PREV key to return to the <MENU> screen.
<OPTIONS>
1.ALARM 4.HOTKEY
2.UNIT 5.AUTOSTAR.
3.UTILITY
<SYSTEM>
1.DATE 2005/03/28
2.TIME 14:25
3. ID 05
<MENU>
1．MEASURE MODE
2．DATA PROCESSING
3． OPTIONS
<UTILITIES>
4.COMMUNICATION
RS232C