KANOMAX S221-00 Handheld IAQ Monitor - Manual (Page 10)

4-1
4. MEASURING AND DATA TRANSFER
4.1. How to Make a Measurement
How to read data in real time when IAQ Monitor is connected to the computer is described below.
1.
Set the communication setting as instructed in the previous chapter. Then from the menu click [Measurement]
[Set].
2. The window like the one shown below will be displayed. Then set the setting and click [OK].
3.
Measuring will start after clicking
[Measure Start] button located at the
bottom right on the main screen.
To stop measuring before it completes,
click [Measure Stop] button.
4. When measuring is done, select [Save
as…] from the menu, and save it under
a new file name. The file format is
CSV.
* The default setting for the location
where the file is to be saved is “C:¥”.
Mode Choose data items to be retrieved.
[Standard Mode]: CO/CO2/Temerature/
Relative Humidity
[Detailed Mode]: CO/CO2/Temerature/
Relative Humidity/Dew-point
Temperature/Wet-bulb Temperature/
Absolute Humidity/Humidity Ratio
Sampling Time Select 1sec, 2sec, 5sec, 10sec, 30sec or
60sec.
Data will be retrieved every selected
second.
Number of Data Set the number of data to be retrieved.
Select any integer number from 1 to
65500.
Graph Select the items to be displayed in the
graph when the data is retrieved.
For the items that shall not be displayed,
uncheck the box.