KEPCO CS 06 Chassis Slides (for EL Series Electronic Load) - Manual (Page 4)

4
228-1734 REV 1 061711
KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102
http://www.kepcopower.com email: [email protected]
6. Attach front and rear cabinet mounting rails (with cabinet and intermediate sections of slide attached) to the
cabinet rail (attaching hardware not supplied) (see Figure 4).
WARNING!
The load is very heavy (80 - 90 pounds). Exercise care when lifting, mounting or
otherwise handling this product. It is recommended that two or more persons
handle the electronic load.
7. Insert Electronic Load into rack by sliding chassis-mounted slide section into the cabinet-mounted intermedi-
ate section).
WARNING!
Do not lean on unit when fully extended. Weight added to the fully extended unit in
excess of 35 lbs can cause the slide to fail and the unit to fall.
FIGURE 4. ATTACHING CABINET SECTION TO RAIL
!
!
3043549
EL SERIES
ELECTRONIC
LOAD
CHASSIS
SECTION
INTERMEDIATE
SECTION
CABINET
SECTION
FRONT
CABINET
RAIL
FRONT
CABINET
MOUNTING
RAIL
REAR
CABINET
MOUNTING
RAIL
REAR
CABINET
RAIL