KEPCO Kit 219-0433, Chassis Slides Kit (for RA 60) - Manual

©2003, KEPCO, INC 1
Data subject to change without notice 228-1467 REV 1
I N S T R U C T I O N M A N U A L
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company. KIT
219-0433
CHASSIS SLIDES KIT NO. 219-0433
1. DESCRIPTION
This Kepco KIT contains the components required to install chassis slides on Kepco RA 58 or RA 60 Rack Adapters
2. INSTALLATION OF CHASSIS SLIDES
2.1 MATERIAL REQUIRED (SEE TABLE 1.)
2.2 PROCEDURE (SEE FIGURES 1, 2 AND 3.)
1. Attach two chassis sections of slide (108-0318) to each side of rack adapter using eight screws (101-0311) (see
Figure 1).
FIGURE 1. INSTALLING CHASSIS SLIDES ON RACK ADAPTER
TABLE 1. MATERIAL REQUIRED
MATERIAL LOCATION QUANTITY
Slide (includes cabinet and chassis sections), Kepco P/N 108-0318
(Jonathan P/N 110QD-18-1)
Provided in this Kit 2
End Bracket, Kepco P/N 128-1849 (Jonathan P/N SPO-440-Z) Provided in this Kit 4
Screw 10-32 x 3/8 in. long, BHPH, cadmium/yellow plated Kepco P/N
101-0311
Provided in this Kit 16
Nut, 10-32 Kepco P/N 102-0008 Provided in this Kit 8
Washer, flat #10 Kepco P/N 103-0031 Provided in this Kit 8
Washer, Internal lock, #10, Kepco P/N 103-0019 Provided in this Kit 8
( 1 ) 108-0318 JONATHAN SLIDE 110-18-QD-1
SLIDE CHASSIS SECTION ONLY