KEPCO MA RAX/RTW 100H User Manual
Rax/rtw, 100h, Kepco
©2007, KEPCO, INC
Data subject to change without notice
228-1622
041107
I N S T R U C T I O N S H E E T
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
MA
100H
RAX/RTW
MOUNTING ADAPTER RAX/RTW 100H
DESCRIPTION.
The Model MA RAX/RTW 100H Mounting Adapter includes an adapter plate and mounting screws
that allow a 100W RTW power supply to be easily substituted for a horizontally-mounted 100W RAX power supply.
Mount the adapter plate to the RTW power supply using the screws provided (see Figure 1), then install the adapter
plate in place of the RAX power supply using the screws that previously secured the RAX power supply.
FIGURE 1. ADAPTER PLATE INSTALLATION
RTW 100W
NOTES:
1. MOUNT ADAPTER PLATE
TO RTW POWER SUPPLY
AT HOLES "A" USING
TWO SCREWS.
2. INSTALL ADAPTER PLATE
WITH RTW POWER SUPPLY
ATTACHED USING HARDWARE
PREVIOUSLY USED TO
MOUNT RAX POWER SUPPLY
(NOT SUPPLIED) AT HOLES "B."
SCREW (2)
P/N 101-0487
(M4 X 10MM, FLPO)
ADAPTER PLATE
P/N 128-2299
A
A
B
B
B
B
1.055
[26.80]
4.330
[109.98]
7.639 [194.03]
3043171