KROHNE VA 40-VA 45 EN - Manual (Page 18)

4
ELECTRICAL CONNECTIONS
18
VA40 - VA45
www.krohne.com 09/2013 - 4000424402 MA VA40 45 R04 en
4.3.2 Limit switch settings MS14
• Untighten bracket screw 1 and set switching position
• Secure bracket screw 1
The distance between the limit switch and the casing is factory set with clamp screw 2 so that
the limit switch touches the glass taper at the maximum switching point.
The limit switch must be rotated 180° to reach the lower range of the scale.
4.3.3 Limit switch settings TG21
• Untighten bracket screw 1 and set switching position
• Secure bracket screw 1
The distance between the limit switch and the casing is factory set at approx. 1 mm (0.039") with
the clamping screw 2.
MA_VA40_45_R04_en_424402_PRT.book Page 18 Monday, September 16, 2013 8:50 AM