Allied Telesis AlliedWare OS - Manual (Page 15)

Page 15 | AlliedWare™ OS How To Note: EPSR
Example 2: A Double Ring
This transit node is the same as in the previous example (except that the domain has been
renamed).
create vlan=vlan1000 vid=1000
add vlan=1000 port=1-2 frame=tagged
create vlan=vlan2 vid=2
add vlan=2 port=1-2 frame=tagged
delete vlan=1 port=1-2
create epsr=domain1 mode=transit controlvlan=vlan1000
add epsr=domain1 datavlan=vlan2
enable epsr=domain1
Configure the control VLAN:
create vlan=vlan40 vid=40
add vlan=40 port=4-5 frame=tagged
Configure the data VLAN:
create vlan=vlan50 vid=50
add vlan=50 port=4-5 frame=tagged
Remove the ring ports from the default VLAN:
delete vlan=1 port=4-5
Configure EPSR:
create epsr=domain2 mode=master controlvlan=vlan40 primaryport=4
add epsr=domain2 datavlan=vlan50
enable epsr=domain2
Configure the control VLAN:
create vlan=vlan40 vid=40
add vlan=40 port=4-5 frame=tagged
Configure the data VLAN:
create vlan=vlan50 vid=50
add vlan=50 port=4-5 frame=tagged
Remove the ring ports from the default VLAN:
delete vlan=1 port=4-5
2. Configure the transit node (switch B) that belongs just to domain 1
3. Configure the master node (switch C) for domain 2
4. Configure the transit node (switch D) that belongs just to domain 2