Allied Telesis AlliedWare OS - Manual (Page 24)

Page 24 | AlliedWare™ OS How To Note: EPSR
Example 5: EPSR with management stacking
The following commands must be entered into the CLI of this particular switch.
First, give the switch a host ID number so that the stack can identify it:
set system hostid=1 serialnumber=12345678
set system name=host1
Create the stacking VLAN and add the ring ports to it. Note the port numbering notation—
these are ports 1 and 2 on stacking host 1. Because this VLAN will also be the EPSR control
VLAN, this step also adds the ring ports to the control VLAN. Use the commands:
create vlan=stack vid=1000
add vlan=1000 port=1.0.1-1.0.2 frame=tagged
delete vlan=1 port=1.0.1-1.0.2
Add the stacking VLAN to the stack and enable stacking:
add stack interface=vlan1000
enable stack
These commands must be entered into the CLI of this particular switch.
set system hostid=2 serialnumber=23456789
set system name=host2
create vlan=stack vid=1000
add vlan=1000 port=2.0.1-2.0.2 frame=tagged
delete vlan=1 port=2.0.1-2.0.2
add stack interface=vlan1000
enable stack
These commands must be entered into the CLI of this particular switch.
set system hostid=3 serialnumber=34567890
set system name=host3
create vlan=stack vid=1000
add vlan=1000 port=3.0.1-3.0.2 frame=tagged
delete vlan=1 port=3.0.1-3.0.2
add stack interface=vlan1000
enable stack
1. Configure stacking on the master node for the EPSR domain (host1)
2. Configure stacking on the first transit node (host2)
3. Configure stacking on the second transit node (host3)