Document Outline

• 1 Safety instructions 5
  • 1.1 Intended use 5
  • 1.2 Safety instructions from the manufacturer 5
    • 1.2.1 Copyright and data protection 5
    • 1.2.2 Disclaimer 6
    • 1.2.3 Product liability and warranty 6
    • 1.2.4 Information concerning the documentation 6
    • 1.2.5 Warnings and symbols used 7
  • 1.3 Safety instructions for the operator 7
• 2 Device description 8
  • 2.1 Scope of delivery 8
  • 2.2 Device description of the system 9
  • 2.3 Device description of the sensor 10
  • 2.4 Nameplate 10
• 3 Installation 11
  • 3.1 Notes on installation 11
  • 3.2 Pre-installation requirements 11
  • 3.3 Installing the sensor 12
    • 3.3.1 Mounting to OPTISYS CL 1100 measuring system 12
  • 3.4 Examples of a typical measuring point 12
• 4 Electrical connections 13
  • 4.1 Safety instructions 13
  • 4.2 Connecting the cable to the sensor 13
  • 4.3 Connecting the sensor cable to the signal converter 14
  • 4.4 Connecting the external temperature sensor 15
• 5 Operation 16
  • 5.1 Menu mode structure 16
  • 5.2 Function tables 18
    • 5.2.1 Menu A, quick setup 18
    • 5.2.2 Menu B, test 19
    • 5.2.3 Menu C, setup 20
  • 5.3 Calibration 22
    • 5.3.1 Calibration order 22
    • 5.3.2 Temperature compensation 22
    • 5.3.3 pH compensation 25
    • 5.3.4 Calibrating the free chlorine/chlorine dioxide/ozone measurement 27
    • 5.3.5 Calibration log 32
  • 5.4 Troubleshooting 32
• 6 Service 33
  • 6.1 Maintenance 33
    • 6.1.1 Cleaning 33
    • 6.1.2 Aging and re-calibration 34
  • 6.2 Spare parts availability 34
  • 6.3 Availability of services 34
  • 6.4 Returning the device to the manufacturer 35
    • 6.4.1 General information 35
    • 6.4.2 Form (for copying) to accompany a returned device 36
  • 6.5 Disposal 36
• 7 Technical data 37
  • 7.1 Measuring principle 37
  • 7.2 Technical data 41
  • 7.3 Dimensions and weights for the system 43
  • 7.4 Dimensions for the sensor 43
• Safety instructions
  • 1.1 Intended use
  • 1.2 Safety instructions from the manufacturer
    • 1.2.1 Copyright and data protection
    • 1.2.2 Disclaimer
    • 1.2.3 Product liability and warranty
    • 1.2.4 Information concerning the documentation
    • 1.2.5 Warnings and symbols used
  • 1.3 Safety instructions for the operator
• Device description
  • 2.1 Scope of delivery
  • 2.2 Device description of the system
  • 2.3 Device description of the sensor
  • 2.4 Nameplate
• Installation
  • 3.1 Notes on installation
  • 3.2 Pre-installation requirements
  • 3.3 Installing the sensor
    • 3.3.1 Mounting to OPTISYS CL 1100 measuring system
  • 3.4 Examples of a typical measuring point
• Electrical connections
  • 4.1 Safety instructions
  • 4.2 Connecting the cable to the sensor
  • 4.3 Connecting the sensor cable to the signal converter
  • 4.4 Connecting the external temperature sensor
• Operation
  • 5.1 Menu mode structure
  • 5.2 Function tables
    • 5.2.1 Menu A, quick setup
      • A9, process input A product calibration (Cl2/ClO2/O3)
      • A12, process input B REDOX calibration
      • A13, process input B pH calibration
    • 5.2.2 Menu B, test
      • B1, sim.process inp.A B2, sim.process inp.B
      • B4, actual values
    • 5.2.3 Menu C, setup
      • C1, process input A C2, process input B
  • 5.3 Calibration
    • 5.3.1 Calibration order
    • 5.3.2 Temperature compensation
    • 5.3.3 pH compensation
    • 5.3.4 Calibrating the free chlorine/chlorine dioxide/ozone measurement
    • 5.3.5 Calibration log
  • 5.4 Troubleshooting
• Service
  • 6.1 Maintenance
    • 6.1.1 Cleaning
    • 6.1.2 Aging and re-calibration
  • 6.2 Spare parts availability
  • 6.3 Availability of services
  • 6.4 Returning the device to the manufacturer
    • 6.4.1 General information
    • 6.4.2 Form (for copying) to accompany a returned device
  • 6.5 Disposal
• Technical data
  • 7.1 Measuring principle
  • 7.2 Technical data
  • 7.3 Dimensions and weights for the system
  • 7.4 Dimensions for the sensor