KROHNE OPTISOUND 3040 C 4wire EN User Manual
Page 17
Advertising
If this distance cannot be maintained, a false echo storage
should be carried out during setup. This applies particularly if
buildup on the vessel wall is expected. In this case, we
recommend repeating the false echo storage later on with
existing buildup.
1
> 500 mm
Fig. 8: Installation position
1
Reference plane
In vessels with conical bottom it can be advantageous to align
the sensor to the center of the vessel, as measurement is then
possible down to the lowest points of the vessel bottom.
Fig. 9: Vessel with conical bottom
OPTISOUND 3040 C - 4 ... 20 mA/HART - four-wire
17
Mounting
30515
-EN
-050914
Advertising