Technical data – KROHNE OPTISENS PAS 2000 EN User Manual
Page 35
TECHNICAL DATA
7
35
OPTISENS PAS 2000
www.krohne.com
11/2008 • MA PAS 2000 R04 en
OPTISENS PAS 2000 pH
OPTISENS PAS 2000 ORP
Materials
Enclosure
316SS
316SS
Cable feed through
PVC
PVC
Sensor holder for telescopic rod
POM
POM
Connection cable
5-pin M 12 contact; fixed on
sensor side, shielded; 10 m /
32.8 ft long; insulation: Hytrel
5-pin M 12 contact; fixed on
sensor side, shielded; 10 m /
32.8 ft long; insulation: Hytrel
Flush hose
PE
PE
Electrode
Design: Combination electrode
12 mm / 0.47"; Length: 120 mm /
4.72"
Design: Combination electrode
12 mm / 0.47"; Length: 120 mm /
4.72"
PG13.5 threated cap
PG13.5 threated cap
KCL-Gel
KCL-Gel
Connector: KOAX
Connector: KOAX
Approvals
Protection class
IP65 (Nema 4x)
Approval mark
CE
EMC (89/336/EEC)
Electromagnetic compatibility (EMC) in accordance with:
EN 61000-6-4:2001 Emission standard for industrial environments
EN 61000-6-2:2001 Immunity for industrial environments
Low Voltage Directive
(89/336/EEC)
Safety requirements for electrical equipment for measurement,
control, and laboratory use in accordance with EN 61010-1:2001
.book Page 35 Friday, November 28, 2008 2:32 PM