KROHNE DK 37 NEPSI Ex i - Manual (Page 12)

5
OPERATION
12
DK37/M8 - H250/M8
www.krohne.com 09/2013 - 4002616801 AD DK37 NEPSI Ex ia R01 en
Operation
5.1 Start-up
Start-up is only permitted when the variable area flowmeter:
• is correctly installed in the system and connected.
• has been checked for the proper state with regard to its installation and connection
requirements.
The user of the system must have it checked before start-up in compliance with the national
regulations for checks before startup.
5.2 Operation
Setting of the limit switches may be carried out during operation. Remove the housing cover to
this purpose. The housing cover has to be closed immediately after the limit switches have been
set.
AD_DK37_NEPSI_Ex_ia_R01_en_4002616801_PRT.book Page 12 Friday, September 13, 2013 8:50 AM