KROHNE PTIFLEX 2200 FOUNDATION FIELDBUS - Manual (Page 3)

SAFETY INSTRUCTIONS
1
3
OPTIFLEX 2200 C
www.krohne.com 09/2013 - 4002573201 - AD FF OPTIFLEX 2200 R01 en
1.1 Scope of the document
These instructions are supplementary to the standard product documentation of the device. The
details depicted therein, in particular the safety information are valid and should be adhered to.
The present supplementary instructions provide additional information for the devices when
being operated and connected to a FOUNDATION™ fieldbus network.
1.2 Device description
The TDR level meter is designed to measure the distance, level, mass and volume of liquids,
pastes, slurries, granulates and powders.TDR level meters use a probe to guide a signal to the
surface of the measured product. The device has a large choice of probes. Thus, it can measure
most products in difficult conditions. For more data about the measuring principle, refer to the
handbook.
1.3 Electronic revision
"Electronic revision" agrees with NAMUR NE 53. It is a number used to record the revision status
of the hardware and embedded software (firmware) in the device. It gives data on the type of
changes made and the effect that changes have on compatibility. The table that follows records
the changes for devices that have the FOUNDATION™ fieldbus option.
Data about the electronic revision is shown in menu 1.1.5 ELECTRO.REV.
INFORMATION!
The present supplementary instructions for the device with a FOUNDATION
™ fieldbus interface,
plus the software with the DD and CFF files are included in our scope of supply, in addition to
those items delivered for the standard device.
DANGER!
If the device is for use in potentially explosive atmospheres, refer to the supplementary
instructions for ATEX, IECEx or other Ex applications.
Release date Electronic revision Changes and compatibility Documentation
2013-02-11 1.00.00 - AD FF OPTIFLEX 2200 R01