KROHNE OPTIWAVE 5200 PROFIBUS - Manual (Page 4)

2
PROFIBUS PA
4
OPTIFLEX 2200 C
www.krohne.com 10/2013 - 4003066801 - MA OPTIFLEX2200C-PA-R01-en-
2.1 Software history
2.2 Device description
This device is a 2-wire level transmitter that uses TDR (Time Domain Reflectometry) / Guided
Radar technology. It measures the distance of liquids, liquid gases, pastes, powders, slurries
and granular products.
The level transmitter has an MBP (Manchester-coded, bus-powered) interface to connect the
device to a PROFIBUS PA network, when equipped with the appropriate options.
The level transmitter is approved for use in potentially explosive atmospheres when equipped
with the appropriate options.
2.3 Function blocks and the PROFIBUS PA Profile
The Analog Input Function Block agrees with PROFIBUS PA Profile 3.02. The Analog Input
Function Block is the data interface to a process control system (a PLC, ...). The control system
(cyclic communication services) can read or write input and output data.
The device has these blocks:
Issued Signal converter Application program System integration
Mth./
year Hardware Firmware Hardware Software Driver Version Model name
08/13 PROFIBUS PA
module Ident.
No
0x4550
(4001858601c)
V2.42.0.42 Simatic
PCS7
or
other SPS of
other
manufact.
HW Config
or
other
Software of
other SPS
manufact.
GSD (device
specific)
KR014550.GSD OPTIFLEX 2200
GSD (profile
specific)
PA1397.GSD AI 1 (Phy MBP)
Laptop / PC PDM
(≥ 6.0 SP5)
DD
(Ident.-No.)
Pactware DTM ≥ 1.0.0
INFORMATION!
The PROFIBUS PA Profile 3.02 has a standard set of parameters and functions available for
PROFIBUS devices used in process control. The PROFIBUS device is a function block application
in which parameters and functions are grouped into different blocks.
Block Usage
1 Physical Block (PB) contains identification and diagnosis parameters of the device
1 Level Transducer Block (TB-Level) contains parameters and functions to control the level
measurement
4 Analog Input Function Blocks (AI-FB) contains parameters and functions to control the measuring
output; provides the measuring value(s)