KROHNE OPTITEMP Compact sensors - Manual (Page 18)

3
INSTALLATION
18
OPTITEMP TRA-CXX
www.krohne.com 02/2014 - 4003290501 - MA OPTITEMP TRA-Cxx R01 en
3.4.1 Possible installations
Installations include the parameters "installation site", "installation angle" and "insertion
length". Depending on the space available and the diameter of the pipe, three installations are
recommended for pipes with flowing product:
• Small pipe diameter: Installation directly against the direction of flow in a bend in the
pipe (1).
• Small pipe diameter: Installation diagonally against the direction of flow, if a bend in the pipe
is available (2).
• Large pipe diameter: Vertical installation, if flow-induced periodic vortex shedding does not
cause the thermometer to vibrate in its resonance frequency (3).
Figure 3-1: Recommended installations
.book Page 18 Friday, February 7, 2014 9:17 AM