7default settings – KROHNE OPTISONIC V6 Modbus User Manual
Page 15
2011-07-19
OPTISONIC_V6_Modbus_6.doc
15/29
K
R
O
H
N
E
C
T
P
ro
d
u
c
ts
7
DEFAULT SETTINGS
By means of a number of parameters the Modbus communication link can be adjusted to one’s needs or
preferences. When the OPTISONIC V6 meter is delivered these parameters are set to default values as
listed below:
Port 0:
Baud rate:
19200
Data bits:
8
Stop bits:
1
Parity:
Even
Modbus Mode:
RTU
Modbus End Code:
2
Addressing Mode:
Modicon compatible
Representation Mode:
Normal
Modbus Address:
237
Modbus Start Gap:
40 (bits)
Modbus End Gap:
20 (bits)
Modbus Start Code:
“:” (colon character)
Modbus End Code1:
ASCII 13 (carriage return, CR)
Modbus End Code2:
ASCII 10 (line feed, LF)
Modbus Time Out:
1 second
Port 1:
Baud rate:
115200
Data bits:
8
Stop bits:
1
Parity:
Even
Modbus Mode:
RTU
Modbus End Code:
2
Addressing Mode:
Modicon compatible
Representation Mode:
Normal
Modbus Address:
237
Modbus Start Gap:
40 (bits)
Modbus End Gap:
20 (bits)
Modbus Start Code:
“:” (colon character)
Modbus End Code1:
ASCII 13 (carriage return, CR)
Modbus End Code2:
ASCII 10 (line feed, LF)
Modbus Time Out:
1 second