KROHNE OPTIFLUX 6000 EN - Manual (Page 12)

3
INSTALLATION
12
OPTIFLUX 6000
www.krohne.com 11/2013 - 4001723703 - HB OPTIFLUX 6000 R03 en
3.4 Pre-installation requirements
Make sure that you have all necessary tools available:
• Allen key (4 mm)
• Small screwdriver
• Wrench for cable glands
• Wrench for wall mounting bracket (remote version only)
• Torque wrench for installing flowmeter in pipeline
3.5 General requirements
3.5.1 Vibration
3.5.2 Magnetic field
INFORMATION!
The following precautions must be taken to ensure reliable installation.
• Make sure that there is adequate space to the sides.
• Protect the signal converter from direct sunlight and install a sun shade if necessary.
• Signal converters installed in control cabinets require adequate cooling, e.g. by fan or heat
exchanger.
• Do not expose the signal converter to intense vibration. The flowmeters are tested for a
vibration level in accordance with IEC 68-2-64.
Figure 3-2: Avoid vibrations
Figure 3-3: Avoid magnetic fields