KROHNE OPTIMASS 7000 EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
OPTIMASS 7000
www.krohne.com 04/2013 - 4001016302 - MA OPTIMASS 7000 R02 en
Safety instructions
1.1 Software history
1.2 Intended use
This mass flowmeter is designed for the direct measurement of mass flow rate, product density
and product temperature. Indirectly, it also enables the measurement of parameters like total
mass, concentration of dissolved substances and the volume flow. For use in hazardous areas,
special codes and regulations are also applicable and these are specified in a separate
documentation.
1.3 CE certification
This device conforms with the following EC directives:
• EMC Directive 2004/108/EC
• ATEX Directive 94/9/EC
• Low Voltage Directive 2006/95/EC
• Pressure Equipment Directive 97/23/EC
The manufacturer declares conformity and the device carries the CE mark.
Release date Software version Documentation
Aug 2008 V2.2.xx MA MFC 300 R02
MA MFC 010 R03
CE marking
MA_OPTIMASS_7000_en_042513_4001016302_R02.book Page 5 Tuesday, July 2, 2013 5:23 PM