KROHNE IFC 070 Converter EN - Manual (Page 20)

6
OPERATION
20
IFC 070
www.krohne.com 11/2009 - 7311242200 - MA IFC 070 R02
• Remove the protection cap.
• Loosen the 4 Allen bolts (4 mm).
• Remove the cover.
• Press both keys simultaneously and press the reset button for 6 seconds as shown in the
graph below. Use a small screwdriver for the reset button.
• Display starts with the menu, beginning with menu no. 12.
• Go to menu no. 13 and change 1 into 0.
• Hold the Z key for 3 seconds to confirm the new value.
• Put the cover back.
• Tighten the 4 Allen bolts.
• Put the blue protection cap back.
CAUTION!
Take care with changing menu number 13. If you set this to "1", the display locks. IF this
happens:
Figure 6-1: Entering the menu if menu no. 13 is set to 1 (fiscal metering active)
WARNING!
Make sure that the battery cable is not jammed by the cover.