KROHNE BM 100A EN - Manual (Page 13)

Installation and operating instructions BM 100 A 13
1 Turnbuckle
2
Chuck for type H Ø4 single cable probe
3 Counterweight with threaded base
4 Avoid play between tube and probe
5 Hole in welded tube for drainage
Anchoring twin rod and coaxial probes
1.3.5 Installation
instructions: Gauge - solid applications
False readings:
1
Do not let probe touch the side of the nozzle
Conical silo nozzles, False readings and traction on the cable probes
Caution
High traction forces :
2
We recommend that the probe should not be
anchored to avoid excessive traction loads on
the cable.
Bending and traction:
3
Position the connection on the roof at ½
radius of the tank and with minimum nozzle
height. This will avoid damage due to
bending and traction during emptying.