KYORITSU 3127 - Manual (Page 8)

－ 5 －
2. Feature
KEW3127 is a microcomputer controlled, high voltage insulation resistance tester
with 5-range for measuring insulation resistance.
● Designed to following safety standards:
IEC 61010-1 (CAT. IV 600V Pollution degree 2)
IEC 61010-031 (Requirements for hand-held probes)
● With auto-discharge function
When insulation resistance like a capacitive load is measured, electrical charges
stored in capacitive circuits are automatically discharged after measuring.
Discharge can be checked on the voltage monitor.
● Backlight function to facilitate working at dimly illuminated location or at
nighttime work.
● Bar graph to display measured result
● LIVE circuit warning symbols plus audible warning
● With Auto-power off function
To prevent the instrument being left powered on and conserve battery power,
the instrument automatically turns off approx. 10 min. after the last switch
operation.
● Auto-measurement and display of PI (Polarization Index), DAR (Dielectric
Absorption Ratio) and DD (Dielectric discharge), Step Voltage (SV), leakage
current and capacitance measurements, and Ramp measurement for
breakdown voltage check.
● Filter function to reduce the variations in readings due to external influences
● With a short current of max 5mA, quick measurement is possible even if the
object under test has capacitive components.
● Internal saved data and real-time measuring data can be transferred to a PC
via Bluetooth communication or by using special USB adapter (MODEL8212
USB). Easy settings for KEW3127 and data analysis via PC are possible with
the application software.