KYORITSU 4300 - Manual (Page 14)

̶ 12 ̶
[How to replace the parts]
Detach the metal tip by turning the red plastic parts counter
clockwise.
Install the metal tip you want to use into the hexagon hole, and
turn the red plastic parts clockwise to tighten firmly.
(2) Test leads
Either of the following adapters should be connected to the cord
with Banana plug, both ends.
[Adapters for MODEL7248]
1. Alligator clip
2. Flat test bar
[How to connect]
Firmly insert and connect the adapter to the end of the cord with
Banana plug, both ends.
# DANGER
To avoid getting electrical shocks, ensure that test leads are
disconnected from the instrument when replacing the metal tip or
adapter for test leads.
メネジ
六角穴
先端金具
Internal
thread
Hexagon
hole
Metal tip
MODEL 8253
MODEL 8072
MODEL 8017
Alligator clip
Flat test bar
Banana plug, both ends
Fig. 6-1
Fig. 6-2