Anritsu AWGN MU368060A - Manual (Page 27)

Section 5 Sample Calibration
5-1
This section describes the calibration procedure for the output level when
using the MU368060A AWGN Unit. This example uses a W-CDMA sys-
tem.
5.1 Calibration of the Output Level................................... 5-2
5.1.1 Adjusting the output level for
the signal generator ....................................... 5-2
5.1.2 Adjusting the level at the input
connector terminal of the receiver ................. 5-3
5.1.3 Measuring the level of the outputted noise .... 5-4
5.1.4 Calibration using the offset setting
function of the RF output level ....................... 5-5