Features, Pr el im in a ry – ADC 500L User Manual

Page 10

Advertising
background image

Features

PRELIMINARY

2

Megabit Modem 500L Installation Manual

PR

EL

IM

IN

A

RY

F

EATURES

The Megabit Modem 500L provides:

•

rate-adaptable ADSL transmission downstream at up to 1.5 Mbps and upstream at
up to 512 kbps

•

Internet or other types of WAN applications and phone service over your existing
phone line

•

Point-to-Point Protocol (PPP) encapsulation method

•

Password and Challenge-Handshake Authentication Protocols (PAP/CHAP) for
authentication of PPP sessions

•

Network Address Translation (NAT) protocol to map the user to the PPP session

•

Dynamic Host Configuration Protocol (DHCP) server to provide network configuration
information including IP addresses to LAN devices

•

TFTP to download software

•

AccessGain™ software to provide access through an HTTP server to configure, manage,
and monitor the modem through a Web-based interface

•

SNMP agent for management through any industry standard SNMP platform

•

autodetecting 10/100BASE-T Ethernet port for connection to the LAN

•

DSLview™ LEDs to provide continual status at-a-glance of power, LAN, and
ADSL connections

•

ATM technology with three virtual channels to allow one active Internet or other
WAN application session at a time

•

PriorityVoice™ to allow full deployment of the modem without splitters or microfilters

•

InstaConnect™ to sense phone activity and optimizes performance

On a Megabit Modem 500L, you can configure three PPP over ATM sessions. However, you
can enable only one of the sessions at a time. You assign the user to the session that is active.

Chapter 9 on page 55

provides more information about the technologies implemented in the

Megabit Modem 500L.

Advertising