ADC Soneplex Broadband System User Manual
Soneplex
Advertising
Table of contents
Document Outline
- Preface
- Introduction
- Operation and Maintenance
- General
- Alphabetical Task List
- Task Index List
- NTPs
- Module Installation and Testing Procedures
- ODS2 Module and Remote System End-to-End Test Procedures
- System or Circuit Provisioning Procedures
- Maintenance Procedures
- Alarms Procedures
- MPU Version 5.3 Software Installation and Testing Procedures
- MPU Configuration Data Save and Transfer Procedures
- HLXC and Remote System End-to-End Test Procedures
- DLX and Remote System End-to-End Test Procedures
- RLX (or RLXIOR) and Remote System End-to-End Test Procedures
- DLPs
- System Components Inspection
- Chassis Inspection
- MPU Installation and Testing
- APU Installation and Testing
- Local Craft Interface Connection
- DS3 MUX Installation and Testing
- ODS2 Module Installation and Testing
- Fiber Optic Connector and Adapter Cleaning and Mating Instructions
- -48 VDC Power Supply Test
- RLX and RLXIOR Status Display
- ODS2 Distribution System and QFLX/QLX Chassis End-to-End Tests
- DS3 MUX Forced Switch Test
- DS3 MUX APS Test
- ODS2 Module Forced Switch Test Through the Craft Interface
- ODS2 Module APS Test
- HDSL-Equipped Circuit Cross-Connects
- HLXC Installation and Testing
- RTAU Installation and Testing
- RLX Alarm Level Setting
- MPU Replacement and Testing
- HLXC and HLXR End-to-End Tests
- DLX Installation and Testing
- DLX-or RLX-Equipped Circuit End-to-End Tests
- Assignment Records
- RLXIOR Installation and Testing
- RLX Installation and Testing
- Craft Interface System Logon
- Alarm History Clearance Command
- System TID/Date/Time Setting
- DS3 MUX Configuration
- ODS2 Module Configuration
- HLX Configuration
- DLX Configuration
- RLXIOR Configuration
- RLX Configuration
- User Account Editing
- Menu Security Editing
- Force/APS Commands
- Reset/LED Test Commands
- ACO (Alarm Cut-Off) Command
- Inventory Display
- Loopback Status/Commands
- Active Alarms Display
- Alarm Summary Display
- Alarm History Display
- Shelf Status Display
- DS3 MUX Status Display
- ODS2 Module Status Display
- HLX and HRX Status Display
- Serial Port Configuraiton
- Shelf Housekeeping Alarm Labels
- MPU Software Download Command
- Alarm/Event Notification Level Setting
- DLX Status Display
- Configuration Data Upload Command
- Configuration Data Download Command
- DS1 PM Configuraiton
- HDSL PM Configuration
- X.25 Port Configuration
- MPU Alarm Level Setting
- DS3 MUX Alarm Level Setting
- ODS2 Module Alarm Level Setting
- HLX Alarm Level Setting
- DLX Alarm Level Setting
- Craft Interface System Logoff
- Performance Monitoring Reports Retrieval
- Circuit ID Display
- RLX (or RLXIOR) to Repeater Voltage and Current Test
- Version C HLXC Voltage to HLXR Test
- RLX-Equipped Circuit Cross-Connects
- RTAU Operation
- Streaker Installation and Testing
- Version D (or Later) HLXC Voltage to HLXR Test
- HLX Loopback Configuration
- TAU Installation and Testing
- TAU Operation
- TBOS Chassis Daisy-Chaining
- TADs
- TAPs
- General Maintenance