NOSHOK 800 Series Electronic Indicating Pressure Transmitter/Switch - Manual (Page 11)

Technical Data
Con guration Pressure, positive or negative
Pressure connection ¼” NPT
Setting Menu-guided programming using control buttons
Adjustable switching points, switchback points,
switching function
Programmable pressure units: bar, psi
Materials
• Measuring component
Stainless steel, ceramic with NBR seal at less than 1500 psi (standard)
• Pressure connection Stainless steel
• Housing Stainless steel, plastic display electronics
Load change > 10 million pressure cycles
Power Requirement 12... 30 VDC
Power consumption ≤ 50 mA, without load current
Outputs 2 switch outputs, programmable
1 programmable switch output and
1 anal
Switch outputs
• Quantity 1 or 2 to N or P potential
• Function Normally open contact (NO) or normally closed contact (NC),
programmable
• Switching current 0.5 A
• Setting Via display with control buttons
- Switching point 1 to
10
100% of full scale
10