Precision Control Systems DryIR 6030 - Manual (Page 8)

Model 6030 Dry IR Drying System Instruction Manual
The HIGH VOLTAGE label is a yellow label indicating a potentially hazardous situation that
could result in injury. The international “lighting bolt” symbol is used on the 6030 to indicate that
high voltage is present inside the enclosure. All power cords to the product must be
disconnected before servicing the product or replacing the lamps. Power is present inside the
housing when the unit is tilted up, even when the position sensing circuit shuts off the lamps.
CAUTION HOT SURFACE – INTERNATIONAL
Position
This label is installed on the heater side panels near the surface of
the lamps and reflector.
Identification
The HOT SURFACE label is a yellow label indicating a potentially
hazardous situation that could result in injury. The international “hot surface” symbol is used on
the Model 6030 to indicate that high temperatures are present on the lamps and reflector. Allow
a minimum of 15 minutes of cool down time for the lamps and reflector before servicing the unit,
replacing lamps, or relocating the unit.
4