Revo NVR - Manual (Page 19)

19
Setup Wizard
Setup Wizard lets you configure basic settings
required for operating the system.
Setup Wizard only appears during initial booting. To
use Wizard after initial booting, go to Live menu and
select Wizard.
Select a system language.
Quick Wizard
1
Start the Quick Setup Wizard.
Select Cancel from any of the Wizard screen to
cancel the setup process and return to the main
setup menu.
2
Specify the current date and time and then click
Next.
• The new date and time settings will only be
applied after clicking Next.
• For more information on date and time
settings, refer to the Date/Time section
under System Setup on page 35.
3
Choose the desired Recording Method and click
Next.
Part 2 - Getting Started