Revo NVR - Manual (Page 51)

Part 3 - Configuration
51
• Status: Used to check the status of the device
being registered to the DVRNS server.
Select Save after making changes to register the
NVR's name to the DVRNS server.
If EZLink has been configured correctly, the DVRNS
server's help desk information will be displayed in the
Help Desk field the next time you access the EZLink
Setup screen.
Device Setup
Refer to the Menu Use on page 34 for basic
information on using the Setup menus.
Alarm-Out
Select the + icon at the bottom left corner of the
screen to add a schedule.
You can apply different schedules for different
Days of
the week.
Select to delete the schedule.
• Dwell Time: Select a value between 5 secs and 15
mins as the alarm-out duration.
• Title: Designate a name for the alarm-out.
• Range: Change the schedule time frame.
• Mode: Select Event, On, or Off.
Event
Generates an alarm-out when an event
occurs.
On Alarm-out is always on.
Off Alarm-out is always off.
• Channels: Configure alarm-out port and beep
settings.
Display Setup
Refer to the Menu Use on page 34 for basic
information on using the Setup menus.
OSD
Show OSD (On Screen Display) information on the
bottom of the screen.
Status
• Date and Time: Displays the date and time.
• Remote Control: Displays remote control
receptivity.
• Free Space: Displays whether or not the NVR is in
the recycle mode, and displays the available storage
space when not in the recycle mode.
• User Name: Displays the current user logged in.
• Background Panel: Displays background panel at
the bottom of the screen in black.
Camera
• No.: Displays the camera number on the upper left
corner of the camera screen.
• Title: Displays the camera name on the upper left
corner of the camera screen.
• Record: Displays recording and schedule icons.
• Audio: Displays the icon on channels
generating audio.
• PTZ: Displays the icon on PTZ cameras.