Revo RECDH409-2 - Manual (Page 11)

This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow to point to
'LENS' by using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button.
LENS (Selection)
►
Note The brightness of the screen can be adjusted in DC mode.
EXPOSURE
EXPOSURE
SHUTTER AUTO
BRIGHTNESS
IIIIIIIIIIIIIIIIII
50
AGC ----
D-WDR OFF
RETURN RET
The EXPOSURE menu is used to set the automatic light control method for this camera.
(Xtended Dynamic Range)
1) SHUTTER Select the shutter mode.(Auto,1/60(50), FLK~ 1/100,000 sec)
Can be changed while in shutter mode.
2) BRIGHTNESS Adjust BRIGHTNESS level (0 ~ 255)
Can be adjusted while in DC/ manual lens mode.
3) AGC Auto gain control (OFF / LOW / MIDDLE / HIGH)
4) DWDR Digital Wide dynamic range
OFF / ON
9
ATW1
AUTO
► MANUAL LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
SPECIAL
IMAGE ADJ
RESET
E
XIT
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
SPECIAL
IMAGE ADJ
RESET
E
XIT
ATW1
AUTO
OFF
►
ATW1
AUTO
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
SPECIAL
IMAGE ADJ
RESET
E
XIT