Revo REHVDPTZ22-1 INSTRUCTION MANUAL - Manual (Page 27)

The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera
sensitive to near infrared.
AUTO Camera goes in to B&W mode at low light.
GLOBAL Controlled by the keyboard
(NOTE: GLOBAL function operates F2E protocol only)
The operator can enable NIGHT SHOT for all dome cameras at the same time.
If the NIGHT SHOT mode is set to GLOBAL, “999” + ENTER will turn Off the NIGHT
SHOT mode and “888” + ENTER will turn On the NIGHT SHOT mode.
ON B/W mode
OFF Color mode
NOTE: AUTO in NIGHT SHOT function is not applied in “MANUAL” mode of AE Control.
• DNR CONTROL
DNR SETUP
2DNR(1) : 001
3DNR(1) : 010
2DNR(2) : 001
3DNR(2) : 003
SAVE AND EXIT(ESC TO CANCEL)
2DNR(1), 2DNR(2) Select 2D noise reduction level (OFF / 1 ~ 7)
3DNR(1), 3DNR(2) Select 3D noise reduction level (OFF / 1 ~ 31)
NOTE: DNR(1) applied when motor stopped. DNR(2) applied when motor moving.
21