Revo REHVDPTZ22-1 INSTRUCTION MANUAL - Manual (Page 75)

- Menu: Enters programming menu.
- Esc: Cancels current inputs. Exits from currently running functions or menu, error status,
etc.
- Home: Immediately calls Home function. Deletes selected value or function in
programming mode.
- Ctrl Off: Control function.
ex) CTRL + Up, Down, Right, Left Button > Operated turbo mode.
- Preset: Pressing the Preset will bring up the preset programming menu.
- Auto Scan: Pressing the Scan will bring up the Auto Scan programming menu.
- Tour: Pressing the Tour button will bring up the tour programming menu directly.
- Pattern: Pressing the Pattern button will bring up the pattern programming menu directly.
4.7 Help
The Help information window will be provided as a popup window so that users can open and
read it without a need for log-in. It will offer a description on setting and Help page by which users
can manipulate the network camera without a reference to the manual.
4.8 Resetting to the factory default settings
To reset the network camera to the original factory settings, go to the Setup > System >
Maintenance web page or use the control button on the network camera, as described below:
• Using the Reset Button
Follow the instructions below to reset the network camera to the factory default settings
using the Reset Button.
1. Switch off the network camera by disconnecting the power adapter.
69