Adaptec ASH-1233 - Manual (Page 11)

4
Installing Your Adaptec ASH-1233 Adapter
3 Locate an unused expansion slot and remove the slot cover.
Save the slot cover screw for use in
Step 5 .
4 Insert the ASH-1233 adapter in the PCI expansion slot. Press
down firmly until the adapter clicks into place. When installed
properly, the adapter should appear level with the expansion slot.
Note: Depending on the tightness of the PCI slot, gentle but
firm force may be required to insert the adapter.
5 Secure the adapter bracket with the slot cover screw you
removed in
Step 3 .
Do not close the computer cabinet, reattach the power cord, or
power on your computer yet. Continue with Preparing Your ATA
Disk Drives
on page 5 .
Expansion slot
cover
Slot cover screw
64-bit PCI expansion slots
32-bit PCI expansion slots