Adaptec ASH-1233 - Manual (Page 27)

20
Troubleshooting
Troubleshooting
If you have any problems using the Adaptec ASH-1233 adapter,
work through these troubleshooting suggestions:
■ Ensure that the ASH-1233 adapter is inserted evenly and
completely in the PCI slot.
■ Ensure that the PCI expansion slot is 5V and compliant with
PCI 2.2 or previous version, and supports Bus Mastering.
■ Check that the ASH-1233 adapter is detected during boot. If it is
not detected, try moving it to another available PCI slot.
■ Check that all ATA cables and power cables are connected.
■ Check the jumper settings on your ATA disk drives.