Seametrics PD10 - Manual (Page 2)

GENERAL INFORMATION & SPECIFICATIONS
Page 2
Designed for use as a meter accessory, the PD10 divider is
used primarily for pacing electronic metering pumps. Any
number from one to 9999 can be set on rotary switches.
Each time the divider has received the set number of pulses
from the meter, it puts out one pulse to stroke the pump.
The PD10 is also useful in boiler and cooling tower feed and
bleed operations, and for lowering frequency output of high
frequency meters. Compatible with all Seametrics flow meters,
the PD10 creates a programmable pulse meter with an easily
adjustable pulse rate.
The PD10 comes in two different housings: an enclosure that
can be mounted near the pump, and a watertight housing for
mounting on the meter.
FEATURES
SPECIFICATIONS*
Wall (Pump) housing shown
(Meter mount also available)
Protective cover
Mounting Holes:
(Double-backed pressure-sensitive
tape also supplied standard)
Rotary Switches (4)
Potted for environmental
protection
Input connector for
Seametrics meter connector
To leads or metering
pump connector
Epoxy-encapsulated ABS housing with cover
Cast aluminum sealed housing
0˚ to 130˚ F (-18˚ to 55˚ C)
1 to 9999
Rotary switches
7 - 30 Vdc @ 4 mA
20 mA
350 Hz (pulses/second)
8 Hz (pulses/second)
Solid state relay; 0-250 V, 170 mA max AC/DC
0.1 second
Seametrics connector
Terminal
Pump connector on 24 inch lead
Comes with 18 foot lead
Enclosure Wall (Pump) Mount
Meter Mount
Temperature
Divider Range
Setting Mechanism
Power
Maximum Sensor Load
Maximum Input Frequency
Maximum Output Frequency
Output
Output Pulse Width
Input Connection Wall Mount
Meter Mount
Output Connection Wall Mount
Meter Mount
*Specifications subject to change • Please consult our website for current data (www.seametrics.com).