2 comparator settings for high/low limits, 1 pattern no. setting – SHIMPO TRC-Series User Manual
Page 12
8
4.2
Comparator settings for High/Low Limits
4.2.1
Pattern No. Setting
The TRC can store up to 10 patterns of High/Low torque limits.
This section describes how to set the pattern No.
The pattern No. is from 0 to 9.
When a torque unit of measure is displayed, the Comparator function may be disabled.
Pattern No.
4.1.7 <Unit No. Setting>
The ID No. can be individually applied.
(Current setting is displayed first.)
Current unit No.
MSD(Most Significant Digit)blinking
LSD(Last Significant Digit) blinking
Press Mode to increment, return to 0 when 9
Press Recall to go to MSD setting
Press Mode to increment, return to 0 when 9
Mode
Mode
Save and exit
Memo
Hi/Lo
F05
F05
F05
Recall
Recall
F03
Go to Auto Reset Setting
Disabled comparator
lbI
Hi/Lo
-1-
Hi/Lo
-2-
Hi/Lo
-9-
Hi/Lo
-0-
Hi/Lo