Thermo Fisher Scientific CyberComm 5000 for CyberScan Series 5000 - Manual (Page 10)

10
3.2 Print Configuration
See Figure 9: Print Configuration Setup.
Set the appropriate requirements for Print Configuration before connecting the meter.
Figure 9: Print Configuration Setup
Print Configuration Option Description
Communication Port
Connect using the preferred connection port
from the drop down menu; 1 or 2. Default is 1.
Baud Rate
Select preferred baud rate from the drop down
menu: 9600, 19200 and 38400. Default is
19200.
Number of Bits
Select preferred Stop Bits from the drop down
menu; 7 or 8. Default is 8.
Stop Bits
Select preferred Stop Bits from the drop down
menu; 1 or 2. Default is 1.
Parity
Select preferred parity from the drop down
menu: None (0), Odd (1) or Even (2). Default is
None (0).
Serial Output mode
Software default is set at DATA. Ensure meter
serial output mode is set at DATA.