Thermo Fisher Scientific CyberComm 5000 for CyberScan Series 5000 - Manual (Page 24)

24
6 MENU BAR
Figure 26: Menu Bar- Same for Single and Dual Channel Meters
Menu Button Description
Start/ Stop tracking
To stop current measurement and the DAS will immediately stop the data
recording. The button will change to ‘Start Tracking’ when Stop Tracking
mode is ON.
You are able to toggle between start and stop at any point of the
measurement to record data.
Zoom In/Out
These two buttons are for optimised view of the measurement graphs.
Click on the respective button to execute task.
Default
Click to have the display go to original settings.
Show Data
Click to view recorded data values in table format. The button will be
inactive when ‘Graph Value’ is ON.
Graph Value
Click to view recorded data values in graph format. The button will be
inactive when ‘Show Data’ is ON.
Copy Plot 1/ Plot 2
Click to copy the selected plot and paste it in other compatible application.
Print Plot1/ Plot 2
Click to print the selected plot via connected printer.