Thermo Fisher Scientific CyberComm Pro for CyberScan CON 1500 - Manual (Page 9)

Instruction Manual CyberComm CON 1500
5
3 CYBERCOMM PRO MAIN MENU
Figure 5: CyberComm Main Menu
See Figure 5. Select Communications Settings and set the appropriate requirements before connecting the
meter.
3.1 Communication Settings (File)
See Figure 6.
To make changes, use the drop-down menu of each parameter to set to desired values to match the meter’s
settings. After selecting proper communication parameters, select OK button to proceed. Otherwise click
CANCEL if no change is made. To restore to factory default settings, click onto the Restore Defaults.
Figure 6: Communications Settings
a) Connect Using
Select COM Port from the drop down menu; 1, 2, 3, 4 or 5 depending on port connected to meter.
b) Baud Rate
Select Baud Rate from the drop down menu. 4800, 9600, 19200 and 38400.
c) Parity
Select Parity from the drop down menu: None (0), Odd (1) or Even (2).
d) Stop Bits
Select Stop Bits from the drop down menu; 1 or 2.